I had a FireStik KW2-B on one of my previous cars for about 3 years and was pleased with it; however, if your mount can support a KW4 (or longer if feasible), the result will be longer range.My KW2 was mounted on the trunk deck using a gumdrop mount.I also have a KW4-W on one of my current vehicles and this review is relatively the same as my review of that antenna...It's a durable antenna that's made in the USA.The antenna is top loaded (coil is at the top) and has a fiberglass whip.If you are new to CB radio, don't forget that you'll also need a mount, coax cable, and an SWR meter for tuning the antenna.More information on tuning the antenna is available on the FireStik website (at the bottom of this product's page or under "Tech Help").I'd recommend reading FireStik's "Tech Help" section and taking their advice when shopping for an antenna:"At least two-thirds of the antenna should be above a vehicles roof line for optimum performance."This antenna adjusts by removing the rubber cap and trimming the antenna down with a pair of diagonal pliers.Be warned that, if you over-trim, you'll be looking at adding a spring or quick disconnect between the antenna and the mount in order to lengthen the antenna again.If you want an antenna that is screw adjusted, take a look at the Firestik II FS series with the tunable tip.Over-all, I believe this is a great antenna.
Click Here to see more reviews about:
FireStik KW2-B Two foot original FireStik CB antenna (Black)Product Description: KW2-B Two foot original FireStik CB antenna (Black)
Buy cheap FireStik KW2-B Two foot original FireStik CB antenna (Black) now
I have purchased two of these Midland units and have been happy with the performance. Nice value for a low price.
ok performance, but the protective layer is not put on completely centered leaving exposed metal (I have recieved 2). I got a number of scratches on my trunk. I believe that I will order a k30 or k40. I am using some electrical tape to provide protection in the interim, hopefully the adhesive doesn't run in the sun.
This is Tim Owner of Snake Radios Incorporated. It is a very well made product and as a radio tech i approve it and reccomend it. You need to get a mirror mount for it or a magnet mount that will support it. A good quality 5 inch magnet mount. Easy to adjust and match the anntenna to the transmitter. You may have to shorten the stinger or radiator depending on you installation and how much ground plain is under it or how much metal.
This is kind of a follow-up on my review of the cb radio I bought with this. Again, this was more of an installation hassle than I expected. If you buy this you just need to realize it means permanently gluing anantenna to your window. . .